S Plus[ROM][JB][4.3.1][JLS36I] CyanogenMod 10.2 ADC Team - Release 1 (EOL) - Kernel

What's working:

Audio
Receiving and making calls
GPS
Compass
Proximity sensor
Wifi
Bluetooth
USB mass storage
HW accelerated gui
HW accelerated video
Camera
BLNv9
USB/Wifi tethering
VSync
USB OTG (Only FAT32 support)
Phantom key presses filtering


Partially working:

Some graphical glitches in Panorama preview

Screenshots:

[Image: 22837442756339028908.png] [Image: 91480476587039542439.png] [Image: 93807353273870899427.png]


CM10.2Installation Guide:

Note: CM for Galaxy S Plus is provided with no warranty. You are installing this software at your own risk. You may be violating your warranty.

Download CM10.2 and gapps-jb zips and put them in /sdcard

WARNING: TO FLASH YOU MUST USE ONE OF THE RECOVERY OF THE TEAM... IT'S NOT AN OPTIONAL CHOICE!!!

~ 20131125 Release 1 -> You are not allowed to view links. Register or Login to view. You are not allowed to view links. Register or Login to view.
MD5SUM: 365c47d4d6c37969a1764be274959154

ROM:

• Change some mount points (credits to Arco68)
  
• ariesve: switch to kernel build during compile rom (credits to krislibaeer)
  
• SamsungRIL: Aling with CM's ME Depersonalization support (credits to erik96)
  
• Initial support for the hardware tunables framework (credits to Czobor)
  
• Overlay: Add custom arrays to base frameworks (credits to erik96)
  
• BoardConfig: woraround create the folder /usr to prevent the build from failing (credits to krislibaeer)
  
• Disable PhaseBeam scrolling (credits to Michael Bestas)
  
• Set ro.telephony.call_ring.multiple=0 (credits to Arco68)
  
• sepolicy: Add policy configuration for SELinux (credits to Christopher83)
  
• ril: aligned custom ariesve ril to SamsungExynos3RIL Note: (credits to CastagnaIT)
  
• Corrected the ril property and some updates (credits to CastagnaIT)
  
• BoardConfig: removed no longer needed BOARD_USE_LEGACY_TOUCHSCREEN (credits to CastagnaIT)
  

~ 20131124 KERNEL -> You are not allowed to view links. Register or Login to view.
MD5SUM: 10670fffce44b9d7c46f2c1b3cf83d03


ATTENTION: This kernel is included in the rom... this download is in case of custom kernel installed and want to come back to stock!

• Kernel 3.4.70
  
• msm: kgsl: Avoid turning on GPU clock if already off (credits to Ananta Kishore K)
  
• Revert "ALSA: fix oops in snd_pcm_info() caused by ASoC DPCM" (credits to Christopher83)
  
• Add exFAT support (credits to radu) (Tested on Samsung 64GB SDXC uhs1 PRO card)
  
• Update defconfigs for exFAT support (credits to Christopher83)
  
• msm: vidc: Reset stop_called state when START is called (credits to Deepak Verma)
  
• msm: vidc: set EOS on output buffer pending transaction (credits to Deepak Verma)
  
• Clone ion.h to msm_ion.h (credits to Arco68)
  
• input: Updates to Phantom Key Presses filter (credits to Christopher83)
  
• SELinux: include definition of new capabilities (credits to Eric Paris)
  
• msm: vidc: Check validity of userspace address (credits to Deepak Verma)
  
• ALSA: pcm: check for integer overflow during multiplication (credits to Phani Kumar Uppalapati)
  
• base: genlock: Zero a structure before sending it to user space (credits to Jordan Crouse)
  
• qt602240_ts: updated touchscreen driver in according of Multi-touch protocol (credits to CastagnaIT)
  

~ 20130813 GApps -> You are not allowed to view links. Register or Login to view. You are not allowed to view links. Register or Login to view.
MD5SUM: 1f51b5cc6370c1f45dc951109b6ce6ed

Please verify the md5sum to be sure you got the right one

Before you install CM10.2: Preparation (First three are optional. If you want to start fresh, these can be skipped)

1. Install You are not allowed to view links. Register or Login to view. from Market, run it and save a list of all your apps.
2. Install You are not allowed to view links. Register or Login to view. from Market, run it and backup your SMS history.
3. Install You are not allowed to view links. Register or Login to view. from Market, run it and backup your call log history.
4. Boot into recovery. Make a full backup. You will need this backup later if you decide to go back to your previous ROM and data.

WARNING: Many apps will Force Close crash if you restore data from a previous ROM.

Install:

1. Here you can find the CWM Recovery and TWRP built by our Team:

WARNING: TO FLASH YOU MUST USE ONE OF THE RECOVERY OF THE TEAM... IT'S NOT AN OPTIONAL CHOICE!!!

You are not allowed to view links. Register or Login to view.

WARNING: We built and tested these recoveries, but always remember that we are not responsible for any damage by using these software!!
They are based on safe kernel on emmc side!!

2. Wipe data and cache.
3. Flash update*.zip.
4. Flash gapps*.zip. You must flash gapps after every upgrade to CM10 since /system is formatted, wiping your previous add-ons.
5. Reboot phone.
6. After you setup your Google account, reinstall the three apps from Market in order to restore most of your apps, call log and SMS history.


WARNING: Do not restore backup data of system apps!

• If you restore a bad backup with cached settings in telephony.db in data/data/com.*.*.telephony it can break MMS.
  
• It seems that restoring backups can also break Calendar sync.
  

Upgrades:

Upgrades from previous versions of CM10.2 are the same process as install, except you do not need to wipe anything. Contrary to popular belief, you do not need to even wipe cache and dalvik-cache when upgrading between CM10.2 versions. You only need to wipe if you are doing a major upgrade, switching to a different ROM entirely, or attempting to fix bugs caused by bad backups or corrupt app data.